ELTROLL Троллейбусный сайт

Trolleybus BKM 42003D

General description of the trolleybus

         Trolleybus model 42003D — two-door trolley with a transistor traction control motor system for alternating current. It’s equipped with an increased autonomous motion system for 20 km on a lithium-titanate batteries, what allows to run significant distances without an overhead line. This capacity allows the trolleybus to pass through the traffic jam on a public transport line, as well it’s able to pass through the railroad crossing or a road with a broken overhead line quickly. This option will also allow to establish passengers carriage to the new city districts without necessity of trolleybus infrastructure installation and will let to avoid a lot of unnecessary transfers on such routes.
         The use of CAN bus technology enables monitoring and diagnostics of the technical status of the trolleybus.

                 Technical features         
- Airy, bright and clear interior design adaptable to customer requirements.         
- Excellent overview of the whole passenger compartment.         
- Passenger compartment 100% low-floor.         
- Easy-to-change external cover made of composite materials.         
- Internal cover from pieces made of plastic         
-2+1 and 2+2 seating         
- Partition between driver’s cab and passenger compartment glazed with a gap for ticket sales.         
- High-performance heating.         
- Technical devices for physically challenged passengers         
- A ramp for an easier entrance of passengers with wheelchairs;         
- The system of body pitch (kneeling);         
- A place for a wheelchair, a special system for its fixation and special seats for physically challenged passengers.         
- Rear axle drive, control by means of IGBT converter.         
- Mains voltage detection message to driver, short circuit detection, automatic lowering of overhead line rods.

                 Optional features installed on the customer’s request         
- Full air-conditioning for the entire vehicle by means of three separate air-conditioning units.         
- Installation of off-line run system up to 20 km based on the LTO-batteries.         
- Conductor seat and heating for conductor area on request from customer.         
- Visual and acoustic aligned passenger information system.         
- Automatic central lubrication system.         
- Fire suppression system.         
- GPS.         
- Power meter.

  • Passenger compartment of the trolleybus

BKM 42003D Passenger compartment

  • Main technical characteristics
Passenger capacity, people 90
Maximum speed, km/h 60
Number of seats 22
Unladen weight of trolley, ready for operation, kg 11900
Maximum mass, kg 18000
Front axle ZF-PASSAU, Germany or RABA, Hungary
Rear Axle ZF-PASSAU, Germany or RABA, Hungary
Mains voltage, V 550
The floor height above the road, mm 340
Number of doors 3
Length, mm 11,755
Width (without mirrors), mm 2,500
Continuous output of electric motor, kW 150

Valid XHTML 1.0 Transitional

© ElTroll 2009-2018